The BKB Xenith is a fully featured dual motor controller for your next esk8 project! It is compatible with hundreds of different motors, remotes, and battery configurations. With its single MCU architecture, setup is a breeze!

Features:

• Built in switch: roll to start, auto shutoff when not in use
• Dual aluminum alloy heatsinks
• Medical grade silicone case
• Integrated Bluetooth Module (connect to your favorite apps!)
• USB C connector for wired programming

What's Included:

• 1x BKB Xenith (Motor controller, dual heatsinks, silicone case)
• 1x Integrated Bluetooth Module
• 1x Momentary Switch
• 1x USB C cable
• 1x PPM Cable
• 2x MT60 Motor Connectors

Tech Specs:

• 160A Continuous Current
• 300A Max Burst Current
• 80A Motor Current (continuous)
• Works with 3-12S Batteries (8V-51V)

Software:

• Compatible with VESC Tool
• Works with firmware 5.1+ or 23.46
• Use PPM, UART, CAN-bus, NRF remotes
• Compatible with apps such as Xmatic, Your's Truly, VESC Tool

Dimensions and Wires:

• 115.5mm x 67mm x 18.13mm
• Motor Wires: 12AWG
• Motor Connector: MT60 (female set included)
• Battery Wires: 12AWG
• Battery Connector: XT60-M
• 12mm Momentary Switch
• Multiple Heatsink Mounting Patterns

Download the tech diagram (including dimensions) Here

By purchasing this device, you agree to the BKB Warranty Agreement